Incorporation of curcumin-loaded solid lipid nanoparticles into yogurt: Tribo-rheological properties and dynamic in vitro digestion.

The incorporation of nanostructures loaded with bioactive compounds into food matrices is a promising approach to develop new functional foods with improved nutritional, health profiles and good sensorial properties. The rheological and tribological properties of yogurt enriched with curcumin-loaded solid lipid nanoparticles (SLN) were evaluated. Also, the TCA solubility index, the bioaccessibility of curcumin and cell viability were assessed after dynamic in vitro digestion. The presence of SLN in yogurt did not affect its rheological properties; however, SLN addition increased the lubrication capability of yogurt. After in vitro digestion, yogurt with added SLN (yogurt_SLN) presented a lower TCA solubility index (22 %) than the plain yogurt (39 %). The bioaccessibility and stability of curcumin were statistically similar for yogurt_SLN (30 % and 42 %, respectively) and SLN alone (20 % and 39 %, respectively). Regarding cell viability results, the intestinal digesta filtrates of both controls (i.e., SLN alone and plain yogurt) did not affect significantly the cell viability, while the yogurt_SLN presented a possible cytotoxic effect at the concentrations tested. In general, the incorporation of SLN into yogurt seemed to promote the mouthfeel of the yogurt and did not adversely affect the bioaccessibility of curcumin. However, the interaction of SLN and yogurt matrix seemed to have a cytotoxic effect after in vitro digestion, which should be further investigated. Despite that, SLN has a high potential to be used as nanostructure in a functional food as a strategy to increase the bioactive compounds' bioaccessibility.

Natural Polymer-Polyphenol Bioadhesive Coacervate with Stable Wet Adhesion, Antibacterial Activity, and On-Demand Detachment.

Medical adhesives are emerging as an important clinical tool as adjuvants for sutures and staples in wound closure and healing and in the achievement of hemostasis. However, clinical adhesives combining cytocompatibility, as well as strong and stable adhesion in physiological conditions, are still in demand. Herein, a mussel-inspired strategy is explored to produce adhesive coacervates using tannic acid (TA) and methacrylate pullulan (PUL-MA). TA|PUL-MA coacervates mainly comprise van der Waals forces and hydrophobic interactions. The methacrylic groups in the PUL backbone increase the number of interactions in the adhesives matrix, resulting in enhanced cohesion and adhesion strength (72.7 Jm-2 ), compared to the non-methacrylated coacervate. The adhesive properties are kept in physiologic-mimetic solutions (72.8 Jm-2 ) for 72 h. The photopolymerization of TA|PUL-MA enables the on-demand detachment of the adhesive. The poor cytocompatibility associated with the use of phenolic groups is here circumvented by mixing reactive oxygen species-degrading enzyme in the adhesive coacervate. This addition does not hamper the adhesive character of the materials, nor their anti-microbial or hemostatic properties. This affordable and straightforward methodology, together with the tailorable adhesivity even in wet environments, high cytocompatibility, and anti-bacterial activity, enables foresee TA|PUL-MA as a promising ready-to-use bioadhesive for biomedical applications.

Methods used to achieve different levels of the neuronal differentiation process in SH-SY5Y and Neuro2a cell lines: An integrative review.

To study the process of neuronal differentiation, the human neuroblastoma (SH-SY5Y) and the murine neuroblastoma (Neuro2a) cell lines have proven to be effective models. For this approach, different protocols involving known neurotrophic factors and other molecules, such as retinoic acid (RA), have been assessed to better understand the neuronal differentiation process. Thus, the goal of this manuscript was to provide a brief overview of recent studies that have used protocols to promote neurodifferentiation in SH-SY5Y and Neuro2a cell lines and used acquired morphology and neuronal markers to validate whether differentiation was effective. The published results supply some guidance regarding the relationship between RA and neurotrophins for SH-SY5Y, as well a serum concentrations for both cell lines. Furthermore, they demonstrate the potential application of Neuro2a, which is critical for future research on neuronal differentiation.

Influence of Ethanol Parametrization on Diffusion Coefficients Using OPLS-AA Force Field.

Molecular dynamics simulations employing the all-atom optimized potential for liquid simulations (OPLS-AA) force field were performed for determining self-diffusion coefficients (D11) of ethanol and tracer diffusion coefficients (D12) of solutes in ethanol at several temperature and pressure conditions. For simulations employing the original OPLS-AA diameter of ethanol's oxygen atom (σOH), calculated and experimental diffusivities of protic solutes differed by more than 25%. To correct this behavior, the σOH was reoptimized using the experimental D12 of quercetin and of gallic acid in liquid ethanol as benchmarks. A substantial improvement of the calculated diffusivities was found by changing σOH from its original value (0.312 nm) to 0.306 nm, with average absolute relative deviations (AARD) of 3.71% and 4.59% for quercetin and gallic acid, respectively. The new σOH value was further tested by computing D12 of ibuprofen and butan-1-ol in liquid ethanol with AARDs of 1.55% and 4.81%, respectively. A significant improvement was also obtained for the D11 of ethanol with AARD = 3.51%. It was also demonstrated that in the case of diffusion coefficients of non-polar solutes in ethanol, the original σOH=0.312 nm should be used for better agreement with experiment. If equilibrium properties such as enthalpy of vaporization and density are estimated, the original diameter should be once again adopted.

Layered double hydroxides for corrosion-related applications-Main developments from 20 years of research at CICECO.

This work describes the main advances carried out in the field of corrosion protection using layered double hydroxides (LDH), both as additive/pigment-based systems in organic coatings and as conversion films/pre-treatments. In the context of the research topic "Celebrating 20 years of CICECO", the main works reported herein are based on SECOP's group (CICECO) main advances over the years. More specifically, this review describes structure and properties of LDH, delving into the corrosion field with description of pioneering works, use of LDH as additives to organic coatings, conversion layers, application in reinforced concrete and corrosion detection, and environmental impact of these materials. Moreover, the use of computational tools for the design of LDH materials and understanding of ion-exchange reactions is also presented. The review ends with a critical analysis of the field and future perspectives on the use of LDH for corrosion protection. From the work carried out LDH seem very tenable, versatile, and advantageous for corrosion protection applications, although several obstacles will have to be overcome before their use become commonplace.

Solubilities of Amino Acids in Aqueous Solutions of Chloride or Nitrate Salts of Divalent (Mg2+ or Ca2+) Cations.

The solubilities of glycine, l-leucine, l-phenylalanine, and l-aspartic acid were measured in aqueous MgCl2, Mg(NO3)2, CaCl2,, and Ca(NO3)2 solutions with concentrations ranging from 0 to 2 mol/kg at 298.2 K. The isothermal analytical method was used combined with the refractive index measurements for composition analysis guaranteeing good accuracy. All salts induced a salting-in effect with a higher magnitude for those containing the Ca2+ cation. The nitrate anions also showed stronger binding with the amino acids, thus increasing their relative solubility more than the chloride anions. In particular, calcium nitrate induces an increase in the amino acid solubility from 2.4 (glycine) to 4.6 fold (l-aspartic acid) compared to the corresponding value in water. Amino acid solubility data in aqueous MgCl2 and CaCl2 solutions collected from the open literature were combined with that from this work, allowing us to analyze the relations between the amino acid structure and the salting-in magnitude.

Molecular Dynamics Model to Explore the Initial Stages of Anion Exchange involving Layered Double Hydroxide Particles.

A classical molecular dynamics (MD) model of fully unconstrained layered double hydroxide (LDH) particles in aqueous NaCl solution was developed to explore the initial stages of the anion exchange process, a key feature of LDHs for their application in different fields. In particular, this study focuses on the active corrosion protection mechanism, where LDHs are able to entrap aggressive species from the solution while releasing fewer corrosive species or even corrosion inhibitors. With this purpose in mind, it was explored the release kinetics of the delivery of nitrate and 2-mercaptobenzothiazole (MBT, a typical corrosion inhibitor) from layered double hydroxide particles triggered by the presence of aggressive chloride anions in solution. It was shown that the delamination of the cationic layers occurs during the anion exchange process, which is especially evident in the case of MBT-.

Modeling Tracer Diffusion Coefficients of Any Type of Solutes in Polar and Non-Polar Dense Solvents.

In this work, a simple two-parameters correlation based on the Rice and Gray, Lennard-Jones, and Stockmayer theories was devised for the calculation of binary diffusion coefficients (D12) of any type of solutes at infinite dilution in polar and non-polar solvents. This equation can be relevant for systems with polar solvents, since most models in the literature fail when strong intermolecular forces predominate in solution. The new correlation embodies the Stockmayer potential without requiring the dipole moments of any component, which significantly enlarges its application. It was validated with the largest D12 database of polar and non-polar dense systems, with 8812 data points (NDP) spanning 553 systems, of which 133 have water as solvent (NDP = 1266), 89 contain polar solvents excluding water (NDP = 1405), 177 have supercritical carbon dioxide (SC-CO2) as solvent (NDP = 5028), and 154 have non-polar or weakly polar solvents excluding SC-CO2 (NDP = 1113). Overall, the model achieved an average deviation of only 3.43%, with accurate and unbiased behavior even for polar systems.

Analysis of a Vegetable Oil Performance in a Milling Process by MQL Lubrication.

In this work, we carried out a comparison between the dry machining of an aluminum block with conventional cutting oil and a block with vegetable oil. The two oils had different flow rates. Using the Taguchi method, it was possible to determine the matrices for optimizing the best parameters for each group of tests. Then, we studied the utility of using vegetable oil as a cutting lubricant. We found that the vegetable oil studied in this work had good properties in terms of reducing cutting temperatures but was less effective than conventional cutting oil in reducing the surface roughness of the machined part. Tribological tests were carried out to understand the influence of the selected lubricants in reducing friction and wear. After the sliding experiments, which were performed without lubrication in the presence of the same lubricants that were used in the machining tests and in the presence of distilled water, we concluded that vegetable oil has satisfactory lubricating properties that are similar to those of the conventional cutting fluid, indicating a potential for consideration as an effective alternative to the conventional cutting fluid, with economic, environmental, and health advantages.

MXenes à la Carte: Tailoring the Epitaxial Growth Alternating Nitrogen and Transition Metal Layers.

A high-throughput analysis based on density functional simulations underscores the viable epitaxial growth of MXenes by alternating nitrogen and metal adlayers. This is supported by an exhaustive analysis of a number of thermodynamic and kinetic thresholds belonging to different critical key steps in the course of the epitaxial growth. The results on 18 pristine N- and C-based MXenes with M2X stoichiometry reveal an easy initial N2 fixation and dissociation, where N2 adsorption is controlled by the MXene surface charge and metal d-band center and its dissociation controlled by the reaction energy change. Furthermore, formation energies indicate the plausible formation of N-terminated M2XN2 MXenes. Moreover, the further covering with metal adlayers is found to be thermodynamically driven and stable, especially when using early transition metal atoms. The most restrictive analyzed criterion is the N2 adsorption and dissociation at nearly full N-covered adlayers, which is yet achievable for almost half of the explored M2X seeds. The present results unfold the possibility of expanding, controlling, and tuning the composition, width, and structure of the MXene family.

Correction to "New Force-Field for Organosilicon Molecules in the Liquid Phase".

[This corrects the article DOI: 10.1021/acsphyschemau.1c00014.].

Being Positive is Not Everything - Experimental and Computational Studies on the Selectivity of a Self-Assembled, Multiple Redox-State Receptor that Binds Anions with up to Picomolar Affinities.

The interaction of the self-assembled trinuclear ruthenium bowl 13+ , that displays three other accessible oxidation states, with oxo-anions is investigated. Using a combination of NMR and electrochemical experimental data, estimates of the binding affinities of 14+ , 15+ , and 16+ for both halide and oxo-anions were derived. This analysis revealed that, across the range of oxidation states of the host, both high anion binding affinities (>109  M-1 for specific guests bound to 16+ ) and high selectivities (a range of >107  M-1 ) were observed. As the crystal structure of binding of the hexafluorophosphate anion revealed that the host has two potential binding sites (named the α and ß pockets), the host-guest properties of both putative binding sites of the bowl, in all of its four oxidation states, were investigated through detailed quantum-based computational studies. These studies revealed that, due to the interplay of ion-ion interactions, charge-assisted hydrogen-bonding and anion-π interactions, binding to the α pocket is generally preferred, except for the case of the relatively large and lipophilic hexafluorophosphate anionic guest and the host in the highest oxidation states, where the ß pocket becomes relatively favourable. This analysis confirms that host-guest interactions involving structurally complex supramolecular architectures are driven by a combination of non-covalent interactions and, even in the case of charged binding pairs, simple ion-ion interactions alone cannot accurately define these recognition processes.

New Force-Field for Organosilicon Molecules in the Liquid Phase.

In this paper, we present a new molecular model that can accurately predict thermodynamic liquid state and phase-change properties for organosilicon molecules including several functional groups (alkylsilane, alkoxysilane, siloxane, and silanol). These molecules are of great importance in geological processes, biological systems, and material science, yet no force field currently exists that is widely applicable to organosilicates. The model is parametrized according to the recent Polarization-Consistent Approach (PolCA), which allows for polarization effects to be incorporated into a nonpolarizable model through post facto correction terms and is therefore consistent with previous parametrizations of the PolCA force field. Alkyl groups are described by the United-Atom approach, bond and angle parameters were taken from previous literature studies, dihedral parameters were fitted to new quantum chemical energy profiles, point charges were calculated from quantum chemical optimizations in a continuum solvent, and Lennard-Jones dispersion/repulsion parameters were fitted to match the density and enthalpy of vaporization of a small number of selected compounds. Extensive validation efforts were carried out, after careful collection and curation of experimental data for organosilicates. Overall, the model performed quite well for the density, enthalpy of vaporization, dielectric constant, and self-diffusion coefficient, but it slightly overestimated the magnitude of self-solvation free energies. The modular and transferable nature of the PolCA force field allows for further extensions to other types of silicon-containing compounds.

Unravelling moisture-induced CO2 chemisorption mechanisms in amine-modified sorbents at the molecular scale.

This work entails a comprehensive solid-state NMR and computational study of the influence of water and CO2 partial pressures on the CO2-adducts formed in amine-grafted silica sorbents. Our approach provides atomic level insights on hypothesised mechanisms for CO2 capture under dry and wet conditions in a tightly controlled atmosphere. The method used for sample preparation avoids the use of liquid water slurries, as performed in previous studies, enabling a molecular level understanding, by NMR, of the influence of controlled amounts of water vapor (down to ca. 0.7 kPa) in CO2 chemisorption processes. Details on the formation mechanism of moisture-induced CO2 species are provided aiming to study CO2 : H2O binary mixtures in amine-grafted silica sorbents. The interconversion between distinct chemisorbed CO2 species was quantitatively monitored by NMR under wet and dry conditions in silica sorbents grafted with amines possessing distinct bulkiness (primary and tertiary). Particular attention was given to two distinct carbonyl environments resonating at δ C ∼161 and 155 ppm, as their presence and relative intensities are greatly affected by moisture depending on the experimental conditions. 1D and 2D NMR spectral assignments of both these 13C resonances were assisted by density functional theory calculations of 1H and 13C chemical shifts on model structures of alkylamines grafted onto the silica surface that validated various hydrogen-bonded CO2 species that may occur upon formation of bicarbonate, carbamic acid and alkylammonium carbamate ion pairs. Water is a key component in flue gas streams, playing a major role in CO2 speciation, and this work extends the current knowledge on chemisorbed CO2 structures and their stabilities under dry/wet conditions, on amine-modified solid surfaces.

Multifunctionality in an Ion-Exchanged Porous Metal-Organic Framework.

Porous robust materials are typically the primary selection of several industrial processes. Many of these compounds are, however, not robust enough to be used as multifunctional materials. This is typically the case of Metal-Organic Frameworks (MOFs) which rarely combine several different excellent functionalities into the same material. In this report we describe the simple acid-base postsynthetic modification of isotypical porous rare-earth-phosphonate MOFs into a truly multifunctional system, maintaining the original porosity features: [Ln(H3pptd)]·xSolvent [where Ln3+ = Y3+ (1) and (Y0.95Eu0.05)3+ (1_Eu)] are converted into [K3Ln(pptd)]·zSolvent [where Ln3+ = Y3+ (1K) and (Y0.95Eu0.05)3+ (1K_Eu)] by immersing the powder of 1 and 1_Eu into an ethanolic solution of KOH for 48 h. The K+-exchanged Eu3+-based material exhibits a considerable boost in CO2 adsorption, capable of being reused for several consecutive cycles. It can further separate C2H2 from CO2 from a complex ternary gas mixture composed of CH4, CO2, and C2H2. This high adsorption selectivity is, additionally, observed for other gaseous mixtures, such as C3H6 and C3H8, with all these results being supported by detailed theoretical calculations. The incorporation of K+ ions notably increases the electrical conductivity by 4 orders of magnitude in high relative humidity conditions. The conductivity is assumed to be predominantly protonic in nature, rendering this material as one of the best conducting MOFs reported to date.

Mechanisms of programmed cell death in the midgut and salivary glands from Bradysia hygida (Diptera: Sciaridae) during pupal-adult metamorphosis.

Programmed cell death is involved with the degeneration/remodeling of larval tissues and organs during holometabolous development. The midgut is a model to study the types of programmed cell death associated with metamorphosis because its structure while degenerating is a substrate for the formation of the adult organ. Another model is the salivary glands from dipteran because their elimination involves different cell death modes. This study aimed to investigate the models of programmed cell death operating during midgut replacement and salivary gland histolysis in Bradysia hygida. We carried out experiments of real-time observations, morphological analysis, glycogen detection, filamentous-actin localization, and nuclear acridine orange staining. Our findings allow us to establish that an intact actin cytoskeleton is required for midgut replacement in B. hygida and nuclear condensation and acridine orange staining precede the death of the larval cells. Salivary glands in histolysis present cytoplasmic blebbing, nuclear retraction, and acridine orange staining. This process can be partially reproduced in vitro. We propose that the larval midgut death involves autophagic and apoptotic features and apoptosis is a mechanism involved with salivary gland histolysis.

Cinnamic Derivatives as Antitubercular Agents: Characterization by Quantitative Structure-Activity Relationship Studies.

Tuberculosis, caused by Mycobacterium tuberculosis (Mtb), remains one of the top ten causes of death worldwide and the main cause of mortality from a single infectious agent. The upsurge of multi- and extensively-drug resistant tuberculosis cases calls for an urgent need to develop new and more effective antitubercular drugs. As the cinnamoyl scaffold is a privileged and important pharmacophore in medicinal chemistry, some studies were conducted to find novel cinnamic acid derivatives (CAD) potentially active against tuberculosis. In this context, we have engaged in the setting up of a quantitative structure-activity relationships (QSAR) strategy to: (i) derive through multiple linear regression analysis a statistically significant model to describe the antitubercular activity of CAD towards wild-type Mtb; and (ii) identify the most relevant properties with an impact on the antitubercular behavior of those derivatives. The best-found model involved only geometrical and electronic CAD related properties and was successfully challenged through strict internal and external validation procedures. The physicochemical information encoded by the identified descriptors can be used to propose specific structural modifications to design better CAD antitubercular compounds.

First-Principles Calculations on the Adsorption Behavior of Amino Acids on a Titanium Carbide MXene.

Due to their vast range of promising biomedical and electronic applications, there is a growing interest in bioinorganic lamellar nanomaterials. MXenes are one such class of materials, which stand out by virtue of their demonstrated biocompatibility, pharmacological applicability, energy storage performance, and feasibility as single-molecule sensors. Here, we report on first-principles predictions, based on density functional theory, of the binding energies and ground-state configurations of six selected amino acids (AAs) adsorbed on O-terminated two-dimensional titanium carbide, Ti2CO2. We find that most AAs (aspartic acid, cysteine, glycine, and phenylalanine) prefer to adsorb via their nitrogen atom, which forms a weak bond with a surface Ti atom, with bond lengths of around 2.35 Å. In contrast, histidine and serine tend to adsorb parallel to the MXene surface, with their α carbon about 3 Å away from it. In both adsorption configurations, the adsorption energies are on the order of the tenths of an electronvolt. In addition, we find a positive, nearly linear correlation between the binding energy of each studied AA and its van der Waals volume, which suggests an adsorption dominated by van der Waals forces. This relationship allowed us to predict the adsorption energies for all of the proteinogenic AAs on the same Ti2CO2 MXene. Our analysis additionally shows that in the parallel adsorption mode there is a negligible transfer of charge density from the AA to the surface but noticeable in the N-bonded adsorption mode. In the latter, the isosurfaces of charge density differences show accumulation of shared electrons in the region between N and Ti, confirming the predicted N-Ti bond. The moderate adsorption energy values calculated, as well as the preservation of the integrity of both the AAs and the surface upon adsorption, reinforce the capability of Ti2CO2 as a promising reusable biosensor for amino acids.

Implicit solvent effects in the determination of Brønsted-Evans-Polanyi relationships for heterogeneously catalyzed reactions.

Heterogeneously catalyzed reactions take place at the catalyst surface where, depending on the conditions and process, the reacting molecules are either in the gas or liquid phase. In the latter case, computational heterogeneous catalysis studies usually neglect solvent effects. In this work, we systematically analyze how the electrostatic contribution to solvent effects influences the atomic structure of the reactants and products as well as the adsorption, activation, and reaction energy for the dissociation of water on several planar and stepped transition metal surfaces. The solvent effects were accounted for through an implicit model that describes the effect of electrostatics, cavitation, and dispersion on the interaction between the solute and solvent. The present study shows that the activation energy barriers are only slightly influenced by the inclusion of the electrostatic solvent effects accounted for in a continuum solvent approach, whereas the adsorption energies of the reactants or products are significantly affected. Encouragingly, the linear equations corresponding to the Brønsted-Evans-Polanyi relationships (BEPs), relating the activation energies for the dissociation reaction with a suitable descriptor, e.g. the adsorption energies of the products of the reaction on the difference surfaces, are similar in the presence or in the absence of the solvent. Despite the associated uncertainties, this suggests that BEP relationships derived without the implicit consideration of the solvent are still valid for predicting the activation energy barriers of catalytic reactions from a reaction descriptor.

Enhancement of Ethane Selectivity in Ethane-Ethylene Mixtures by Perfluoro Groups in Zr-Based Metal-Organic Frameworks.

A series of zirconium dicarboxylate-based metal-organic frameworks (Zr MOFs) of the UiO-66 (tetrahedral and octahedral cages) or MIL-140 (triangular channels) structure type were investigated for the separation of ethane/ethylene mixtures. The adsorption, investigated both experimentally and computationally, revealed that the size and type of pores have a more pronounced effect on the selectivity than the aromaticity of the linker. The increase in pore size when changing from benzene to naphthalene (NDC) dicarboxylate ligand makes UiO-NDC less selective (1.3-1.4) than UiO-66 (1.75-1.9) within the pressure range (100-1000 kPa), while the three-dimensional (3D) pores of the UiOs favor the adsorption of ethane due to the interactions between ethane with more spacers than in the case of the 1D channels of MIL-140s. The impact of the functionalization revealed a very interesting increase of selectivity when two perfluoro groups are present on the aromatic ring (UiO-66-2CF3) (value of 2.5 up to 1000 kPa). Indeed, UiO-66-2CF3 revealed a unique combination of selectivity and working capacity at high pressures. This is due to a complex adsorption mechanism involving a different distribution of the guest molecules in the different cages associated with changes in the ligand/perfluoro orientation when the pressure increases, favoring the ethane adsorption at high pressures.